Note: If your pressure and temperature standards are different, please apply the following correction factor depending upon which standard you want to follow. Slpm [ Std pressure 1 bar (100 kPa), and Std temperature 0 deg C] Scfm [Std pressure atm (14.7 psia), Std Temperature 60 deg F] The correction factor is 1.043 .
Slpm [ Std pressure 1 bar (100 kPa), and Std temperature 20 deg C] Scfm [Std pressure atm (14.7 psia), Std Temperature 68 deg F] The correction factor is 0.972.
Multiply the result while converting from Slpm to Scfm and devide the result while converting from Scfm to Slpm using the above correction factor.
